These are published commercial tolerances. In many instances, we are able to guarantee much closer tolerances. Contact your Rolled Metal Products representative with specific inquiries. Other tolerances upon request.
| Thickness Tolerances (Annealed Material) | ||||||
| Thickness (inches) | Width (inches) | |||||
| < 1" +/- |
1" to < 3" +/- |
3" to 6" +/- |
>6" to 12" +/- |
>12" to 16" +/- |
>16" to 24" +/- |
|
| .0150 to .0199 | 0.0010 | 0.0010 | 0.0010 | 0.0015 | 0.0015 | 0.0015 |
| .0200 to .0259 | 0.0010 | 0.0010 | 0.0015 | 0.0015 | 0.0015 | 0.0015 |
| .0260 to .0289 | 0.0010 | 0.0015 | 0.0015 | 0.0015 | 0.0015 | 0.0015 |
| .0290 to .0349 | 0.0015 | 0.0015 | 0.0020 | 0.0020 | 0.0020 | 0.0020 |
| .0350 to .0399 | 0.0020 | 0.0020 | 0.0020 | 0.0020 | 0.0020 | 0.0020 |
| .0400 to .0499 | 0.0025 | 0.0025 | 0.0025 | 0.0030 | 0.0030 | 0.0030 |
| .0500 to .0689 | 0.0030 | 0.0030 | 0.0030 | 0.0030 | 0.0030 | 0.0030 |
| .0690 to .0999 | 0.0030 | 0.0030 | 0.0030 | 0.0030 | 0.0040 | 0.0040 |
| .1000 to .1609 | 0.0040 | 0.0040 | 0.0040 | 0.0040 | 0.0040 | 0.0050 |
| .1610 to .1875 | 0.0040 | 0.0040 | 0.0040 | 0.0040 | 0.0050 | 0.0060 |
Our experts are ready to answer your requests. Fill out our short request a quote form below, and a representative will be in touch with you as soon as possible.
Data are typical, are provided for informational purposes, and should not be construed as maximum or minimum values for specification or for final design, or for a particular use or application. The data may be revised anytime without notice. We make no representation or warranty as to its accuracy and assume no duty to update. Actual data on any particular product or material may vary from those shown herein.
© Rolled Metal Products. All rights reserved.
