Type 436 is a modification of Type 430 with columbium and molybdenum added to reduce the tendency of wavy lines, or roping, during forming. It has improved corrosion resistance and weldability. Automotive and appliance trims are typical applications.
Chemical Composition (wt%) limits as specified in ASTM A240 and ASME SA240*
| Element | 436 |
| Carbon | 0.12 |
| Chromium | 16.0-18.0 |
| Molybdenum | 0.75-1.25 |
| Manganese | 1.00 |
| Silicon | 1.00 |
| Phosphorus | 0.040 |
| Sulfur | 0.030 |
Mechanical property requirements for annealed product as specified in ASTM A240 and ASME SA240
| Property | 436 |
| Yield Strength, min. (ksi) | 40 |
| Tensile Strength, min. (ksi) | 65 |
| Elongation, min. (%) | 20 |
| Hardness, max. (Rb) | 90 |
Physical properties for Type 436 stainless steel
| Property | 436 Data |
| Density, lb/in3 | 0.276 |
| Modulus of Elasticity, psi | 29.0 x 106 |
| Coefficient of Thermal Expansion, 68-212˚F, /˚F | 5.6 x 10-6 |
| Thermal Conductivity, Btu/ft hr ˚F | 13.0 |
| Specific Heat, Btu/lb ˚F | 0.11 |
| Electrical Resistivity, Microohm-in | 23.6 |
Typical standards for Type 436 stainless steel
| 436 |
| ASTM A240 |
| ASME SA240 |
| AMS 5503 |
Our experts are ready to answer your requests. Fill out our short request a quote form below, and a representative will be in touch with you as soon as possible.
Data are typical, are provided for informational purposes, and should not be construed as maximum or minimum values for specification or for final design, or for a particular use or application. The data may be revised anytime without notice. We make no representation or warranty as to its accuracy and assume no duty to update. Actual data on any particular product or material may vary from those shown herein.
© Rolled Metal Products. All rights reserved.
